Overview
The Cisco WS-X6148A-GE-45AF module is a high-performance interface card designed specifically for the Cisco Catalyst 6500 series switches. This module offers exceptional functionality and flexibility, making it ideal for enterprise and data center networks requiring high-density, high-speed connectivity. This module supports 48 ports of Gigabit Ethernet connectivity, ensuring seamless data transfer at high speeds within the network. With Power over Ethernet capabilities, this module can deliver power to connected devices such as IP phones, wireless access points, and surveillance cameras, eliminating the need for separate power sources and simplifying network deployment. It comes equipped with advanced features such as Quality of Service (QoS), VLAN support, and Layer 3 routing capabilities, enabling efficient traffic management and network segmentation for enhanced performance and security. With support for Cisco Virtual Switching System (VSS) technology, multiple WS-X6148A-GE-45AF modules can be deployed to create a single, logical switch with increased scalability and redundancy.
Specification
Specifications | |
---|---|
Standard protocols | IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3x, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3ak, IEEE 802.3aq, and IEEE 802.3an |
Physical specifications | Occupies one slot in the Cisco Catalyst 6500 Series chassis or Cisco 7600 Series chassis
Dimensions (H x W x D): 1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm) Weight: Cisco Catalyst 6708 and 6716: 13 pounds excluding X2 components; ¼ pound for each X2 Cisco Catalyst 6704: 10 pounds excluding XENPAK and DFC components; 2/3 pound for each XENPAK |
Environmental conditions | Operating temperature:
Agency-certified for operation: 32 to 104°F (0 to 40°C) Design and tested for operation 32 to 130°F (0 to 55°C) Storage temperature: –40 to 167°F (–40 to 75°C) Relative humidity: 10 to 90 percent, noncondensing Operating altitude: Agency-certified for operation: –500 to 6500 ft (–150 to 2000m) Designed and tested for operation –500 to 10000 ft (–150 to 3000m) |
Regulatory compliance | Cisco Catalyst 6500 Series 10 Gigabit Ethernet modules, when installed in a system, comply with the following EMC and safety standards:
EMC Standards: FCC Part 15 (CFR 47) Class A ICES-003 Class A VCCI Class A EN55022 Class A EN55024 CISPR24 CISPR 22 Class A AS/NZS CISPR 22 Class A ETS 300 386 KN 22 Class A EN 50082-1 EN61000-3-2 EN61000-3-3 EN61000-6-1 CNS13438 Class A KN6100 -4 Series Safety Standards: UL 60950-1 CAN/CSA C22.2 No. 60950 EN 60950-1 IEC 60950-1 AS/NZS 60950-1 IEC 60825 Class 1 EN 60825 Class 1 21CFR 1040 |
NEBS criteria levels | SR-3580 Issue 3, June 2007 (GR-63-CORE, issue 3, and GR-1089-CORE, issue 4) |
ETSI | ETS 300 019-2-1, Class 1.1 Storage
ETS 300 019-2-2, Class 2.1 and 2.2 Transportation ETS 300 019-2-3, Class 3.1E Stationary Use |
Network management | ETHERLIKE-MIB (RFC 1643)
IF-MIB (RFC 1573) Bridge MIB (RFC 1493) CISCO-STACK-MIB CISCO-VTP-MIB CISCO-CDP-MIB RMON MIB (RFC 1757) CISCO-PAGP-MIB CISCO-STP-EXTENSIONS-MIB CISCO-VLAN-BRIDGE-MIB CISCO-VLAN-MEMBERSHIP-MIB ENTITY-MIB (RFC 2037) HC-RMON RFC1213-MIB (MIB-II) SMON-MIB |
Power requirements | WS-X6716-10T-3C: 509.3W (12.1A @ 42V)
WS-X6716-10T-3CXL: 538.7W (12.8A @ 42V) WS-X6716-10G-3C: 457.8W (10.9A @ 42V) WS-X6716-10G-3CXL: 487.2W (11.6A @ 42V) WS-X6708-10G-3C: 444.36W (10.58A @ 42v) WS-X6708-10G-3CXL: 473.76w (11.28A @ 42V) WS-X6704-10GE with DFC3CXL: 362.46W (8.63A @ 42V) WS-X6704-10GE with DFC3C: 333.06W (7.93A @ 42V) WS-X6704-10GE with DFC3BXL: 402.36W (9.58A @ 42V) WS-X6704-10GE with DFC3B: 377.16W (8.98A @ 42V) WS-X6704-10GE with DFC3A: 389.76W (9.28A @ 42V) WS-X6704-10GE with CFC: 295.26W (7.03A @ 42V) |
Indicators | Status: green (operational), red (faulty), and orange (module booting) Link: green (port enabled and connected), orange (port disabled), and off (port enabled and not connected) |