Overview
The Cisco Nexus 3000 series N3K-C3264C-E switches are efficient network switches designed to meet the demands of modern data centers, offering a reliable and fast solution for networking needs. These switches have a compact design that makes them perfect for small to medium-sized businesses seeking a strong network infrastructure. The Cisco Nexus 3000 series N3K-C3264C-E switches are equipped with 64 fixed 40/100 Gigabit Ethernet ports. This allows for fast and efficient data transfers, enabling your network to handle large volumes of traffic. Its user-friendly interface and straightforward setup make network deployment a breeze. The switch also supports a variety of management options, allowing administrators to configure and monitor the network with flexibility. Moreover, the Cisco Nexus 3000 series N3K-C3264C-E switches support advanced features like VLANs and QoS (Quality of Service), allowing users to segment the network and prioritize critical data traffic.
Specification
Specification | |
---|---|
Physical | 64 fixed 100-Gigabit Ethernet QSFP28 ports 16 fixed ports of MACsec Beacon LED Environment LED Status LED Lane-selected LED Dual redundant power supplies Redundant (3+1) fans 2 100/1000-Mbps SFP ports (port 65 and port 66 in front) 1 RS-232 serial console port 1 RJ45 and 1 SFP Management port 1 USB port |
Performance | Line-rate traffic throughput (both Layer 2 and 3) on all ports 12.8 -Tbps switching capacity Configurable Maximum Transmission Units (MTUs) of up to 9416 bytes (jumbo frames) |
Typical operating power | 392W |
Maximum power | 1263W |
Typical heat dissipation | 1337 BTUs/hour |
Maximum heat dissipation | 4309 BTUs/hour |
Max Mac Addresses | Host Mode (urpf disabled):73K L2 (urpf disabled): 200K |
Max IPv4 Host routes | Host Mode (urpf disabled):73K L2 (urpf disabled): 200K |
Max IPv6 Host routes | Host Mode (urpf disabled):100K L2 (urpf disabled): 36K |
Max IPv4 LPM routes | Host Mode (urpf disabled):100K L2 (urpf disabled): 28K |
Max IPv6 LPM routes (<=64) | Host Mode (urpf disabled):12K L2 (urpf disabled): 12K |
Max IPv4 LPM routes (>64 & <128) | Host Mode (urpf disabled):1024 L2 (urpf disabled): 1024 |
Number of VLANs | 4096 |
Number of ACL entries | 6000 Ingress 1000 Egress |
Number of spanning-tree instances | Rapid Spanning Tree Protocol (RSTP): 512 Multiple Spanning Tree (MST) Protocol: 64 |
Number of EtherChannels | 256 |
Number of ports per EtherChannel | 32 |
Buffer size | 42 Mb |
Boot flash memory | 128 GB |
Number of power supplies | 2 (redundant) |
Power supply types | AC (forward and reversed airflow) |
Input voltage | 100 to 240 VAC |
Frequency | 50 to 60 Hz |
Power supply efficiency | 89 to 91% at 220V |
Forward and reversed airflow schemes | Forward airflow: Port-side exhaust (air enters through fan tray and power supplies and exits through ports) Reversed airflow: Port-side intake (air enters through ports and exits through fan tray and power supplies) 4 individual, hot-swappable fans (3+1 redundant) |
Dimensions (height x width x depth) | 3.39 x 17.4 x 23.5 in. (4.36 x 43.9 x 46.7 cm) |
Weight | 34.82 lbs (15.79kg) |
Operating temperature | 32° to 104°F (0° to 40°C) |
Storage temperature | –40° to 158°F (-40° to 70°C) |
Relative humidity | 5 to 95% noncondensing |
Altitude (operating) | Designed to meet: –500 ft to 13,123 ft |
Altitude (Nonoperating) | –1000 ft to 30,000 ft |