LS-S5328C-HI Specification
|
Fixed port
|
24 10/100/1000Base-T ports
|
Forwarding performance
|
96 Mpps
|
Extended slot
|
provides an extended slot for an uplink subcard
|
MAC address table
|
IEEE 802.1d
|
128K MAC address entries
|
MAC address learning and aging
|
Static, dynamic, and blackhole MAC address entries
|
Packet filtering based on source MAC addresses
|
VLAN
|
4K VLANs
|
Guest VLAN and voice VLAN
|
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports
|
VLAN mapping
|
MPLS
|
MPLS, MPLS VLL,L3VPN
|
VPLS
|
Martini VPLS
|
IP routing
|
Static routing, RIPv1, RIPv2, OSPF, IS-IS, BGP, and ECMP
|
IPv6 features
|
Neighbor Discovery (ND)
|
Path maximum transmission unit (PMTU)
|
IPv6 Ping, IPv6 Tracert, and IPv6 Telnet, MLD v1/v2 snooping
|
ACLs based on source IPv6 addresses, destination IPv6 addresses, Layer 4 ports or protocol types
|
6to4 tunnel, ISATAP tunnel, and manually configured tunnel
|
Multicast
|
IGMP v1/v2/v3 snooping and IGMP fast leave
|
Multicast forwarding in a VLAN and multicast replication between VLANs
|
Multicast load balancing among member ports of a trunk
|
Controllable multicast
|
Port-based multicast traffic statistics
|
IGMP v1/v2/v3, PIM-SM, PIM-DM, and PIM-SSM
|
QoS/ACL
|
Rate limiting on packets sent and received by an interface
|
Packet redirection, WRED
|
Port-based traffic policing and two-rate three-color CAR
|
Eight queues on each port
|
WRR, DRR, PQ, WRR+PQ, and DRR+PQ queue scheduling algorithms
|
Re-marking of the 802.1p priority and DSCP priority
|
Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, port number, protocol type, and VLAN ID
|
Rate limiting in each queue and traffic shaping on ports
|
Security features
|
User privilege management and password protection
|
DoS attack defense, ARP attack defense, and ICMP attack defense
|
Binding of the IP address, MAC address, interface, and VLAN
|
Port isolation, port security, and sticky MAC
|
Blackhole MAC address entries
|
Limit on the number of learned MAC addresses
|
802.1x authentication and limit on the number of users on an interface
|
AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC SSH v2.
|
Hypertext Transfer Protocol Secure (HTTPS)
|
CPU defense
|
Blacklist and whitelist
|
Reliability
|
RRPP ring topology and RRPP multi-instance
|
Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover
|
SEP, ERPS(G.8032 v2), E-Trunk, iStack
|
STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s)
|
BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM
|
BPDU protection, root protection, and loop protection
|
OAM
|
Hardware implementation
EFM OAM
CFM OAM
Y.1731 performance test supports hardware-level delay and jitter detection
|
Management and Maintenance
|
MAC Forced Forwarding (MFF)
|
Virtual cable test
|
Port mirroring and RSPAN (remote port mirroring)
|
Remote configuration and maintenance by using Telnet
|
SNMP v1/v2/v3, RMON, Web NMS, GVRP, MUX VLAN, 802.3az EEE
|
System logs and alarms of different levels
|
Operating environment
|
Operating temperature: 0 o C–50 o C (long term); -5 o C–55 o C (short term)
Relative humidity: 10%–90% (non-condensing)
|
Input voltage
|
AC:
Rated voltage range: 100 V to 240 V AC, 50/60 Hz
Maximum voltage range: 90 V to 264 V AC, 50/60 Hz
DC:
Rated voltage range: –48 V to –60 V, DC
Maximum voltage range: –36 V to –72 V, DC
|
Dimensions (mm)
|
442 mm x 220 mm x 43.6 mm
|
Typical power consumption
|
< 76 WÂÂ
|