huge-inventory.webp
free-shipping.webp
extended-replacement.webp
  • JH326A

    HPE 5130 48G PoE+ 4SFP+ 1-slot HI Switch
  • Condition:

    New Factory Sealed
  • IN STOCK Delivery within 48 hours

  • Warranty:  3 Years *

  • Type HPE 5130 48G PoE+ 4SFP+ HI with 1 Interface Slot Switch
    I/O ports and slots 48 RJ-45 autosensing 10/100/1000 POE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only; Ports 1 - 8 support MACSec
    4 SFP+ 10GbE ports
    1 port expansion module slot
    Supports a maximum of 6 SFP+ ports or 2 1/10GBASE-T ports, with optional module
    Memory and processor 2 GB SDRAM; Packet buffer size: 4 MB, 512 MB flash
    Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
    Fan tray Airflow direction is Front (port side) to Back (power cord side)
    1000 Mb Latency < 5 µs
    10 Gbps Latency < 3 µs
    Throughput up to 190.5 Mpp/s
    Routing/Switching capacity 256 Gb/s
    Routing table size 32768 entries (IPv4), 16384 entries (IPv6)
    MAC address table size 32768 entries
    Power supplies 2 power supply slots
    1 minimum power supply required (ordered separately)
    Dimensions (H x W x D) 4.37 x 43.99 x 46 cm (1.72 x 17.32 x 18.11 in) (1U height)
    Weight 12.5 kg (27.56 lb)
    Frequency 50 / 60 Hz
    Maximum heat dissipation 365 BTU/hr (385.08 kJ/hr), Ranges from 167 BTU/hr to 392 BTU/hr, depending on power supply configuration
    Voltage 100 - 240 V ac, rated (90 - 264 Vac, max)
    -48 to -60 V dc, rated (-36 to -72 V dc, max) (depending on power supply chosen)
    Idle power 55 W
    Maximum power rating 107 W
    PoE power N/A
    Operating Temperature 0°C to 55°C (32°F to 131°F); 40°C (32°F to 104°F) when used with any SFP+ 10-GbE
    Operating relative humidity 40°C (15% to 95% @ 104°F) noncondensing
    Nonoperating/Storage temperature -40°C to 70°C (-40°F to 158°F)
    Nonoperating/Storage relative humidity 65°C (15% to 90% @ 149°F) noncondensing
    Acoustic Pressure: 51.8 dB, Low-speed fan: 51.8 dB, High-speed fan: 55.3 dB; ISO 7779
    Safety UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS Compliance
    Emissions EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A; EN 61000-4-11:2004; ANSI C63.4-2009; EN 61000-3-3:2008; VCCI V-4/2012.04; EN 6100-3-2:2006+A1:2009 + A2:2009; EN 61000-3- 2:2006+A1:2009+A2:2009 ; EN 61000-4-3:2006; EN 61000-4-4:2012; EN 61000-4-5:2006; EN 61000- 4-6:2009; AS/NZS CISPR 22:2009 Class A; CISPR 22:2008 Class A; EN 55022:2010 Class A; EN 61000- 4-29: 2000; CISPR 24:2010; EN 300 386 V1.6.1; VCCI V-3/2013.04 Class A
    Immunity Generic EN 55024
    ESD EN300 386
    Management IMC - Intelligent Management Center, Command-line interface, Web browser, SNMP manager
  • View full specification...

  • 3 Years Extended Warranty 100% Ready Stock Best Price Match
    100% Genuine Products 24/7 Technical Support
JH326A

HPE 5130 48G PoE+ 4SFP+ 1-slot HI Switch

Overview Specification Support Warranty

Overview Of JH326A

No Data Found

Specification Of JH326A

JH326A Datasheet

Specification
Type HPE 5130 48G PoE+ 4SFP+ HI with 1 Interface Slot Switch
System specifications
I/O ports and slots 48 RJ-45 autosensing 10/100/1000 POE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only; Ports 1 - 8 support MACSec
4 SFP+ 10GbE ports
1 port expansion module slot
Supports a maximum of 6 SFP+ ports or 2 1/10GBASE-T ports, with optional module
Memory and processor 2 GB SDRAM; Packet buffer size: 4 MB, 512 MB flash
Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
Fan tray Airflow direction is Front (port side) to Back (power cord side)
1000 Mb Latency < 5 µs
10 Gbps Latency < 3 µs
Throughput up to 190.5 Mpp/s
Routing/Switching capacity 256 Gb/s
Routing table size 32768 entries (IPv4), 16384 entries (IPv6)
MAC address table size 32768 entries
Power supplies 2 power supply slots
1 minimum power supply required (ordered separately)
Physical specifications
Dimensions (H x W x D) 4.37 x 43.99 x 46 cm (1.72 x 17.32 x 18.11 in) (1U height)
Weight 12.5 kg (27.56 lb)
Electrical specifications
Frequency 50 / 60 Hz
Maximum heat dissipation 365 BTU/hr (385.08 kJ/hr), Ranges from 167 BTU/hr to 392 BTU/hr, depending on power supply configuration
Voltage 100 - 240 V ac, rated (90 - 264 Vac, max)
-48 to -60 V dc, rated (-36 to -72 V dc, max) (depending on power supply chosen)
Idle power 55 W
Maximum power rating 107 W
PoE power N/A
Environmental specifications
Operating Temperature 0°C to 55°C (32°F to 131°F); 40°C (32°F to 104°F) when used with any SFP+ 10-GbE
Operating relative humidity 40°C (15% to 95% @ 104°F) noncondensing
Nonoperating/Storage temperature -40°C to 70°C (-40°F to 158°F)
Nonoperating/Storage relative humidity 65°C (15% to 90% @ 149°F) noncondensing
Acoustic Pressure: 51.8 dB, Low-speed fan: 51.8 dB, High-speed fan: 55.3 dB; ISO 7779
Safety agency certifications and emissions
Safety UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS Compliance
Emissions EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A; EN 61000-4-11:2004; ANSI C63.4-2009; EN 61000-3-3:2008; VCCI V-4/2012.04; EN 6100-3-2:2006+A1:2009 + A2:2009; EN 61000-3- 2:2006+A1:2009+A2:2009 ; EN 61000-4-3:2006; EN 61000-4-4:2012; EN 61000-4-5:2006; EN 61000- 4-6:2009; AS/NZS CISPR 22:2009 Class A; CISPR 22:2008 Class A; EN 55022:2010 Class A; EN 61000- 4-29: 2000; CISPR 24:2010; EN 300 386 V1.6.1; VCCI V-3/2013.04 Class A
Immunity Generic EN 55024
ESD EN300 386
Management IMC - Intelligent Management Center, Command-line interface, Web browser, SNMP manager
Our Trusted Clientele Worldwide
Esr-Connect
Johnson-and-Johnson
Exon
Novartis
Siemens-Healthineers
Sheraton
Sk-Telecom
ASDA
DHL
UPS
Lezzat-ltd
Electrotechnical-certification-scheme
WHY ORM SYSTEMS
why orm system image
why orm system image
Technical Support

ORM Systems offers reliable and scalable renowned products that allow seamless expansion to performance and adaptability to network enterprises. Our professional team of highly skilled engineers provides 360 technical support to help you with presale and after-sales journeys to enable customers with features and capabilities of the products.

We strive to deliver a seamless experience that guarantees complete satisfaction along with guidance and support in service settings to promptly resolve issues.

Standard Services
Standard Services image
Standard Services image
Get Quote
Get a free quote!
× Thank you! your form has been submitted successfully. Our expert will be in touch with you shortly.
×
ORM Registered Companies