huge-inventory.webp
free-shipping.webp
extended-replacement.webp
  • JG309B

    HPE 5120 8G PoE+ (180W) SI Switch
  • Condition:

    New Factory Sealed
  • IN STOCK Delivery within 48 hours

  • Warranty:  3 Years *

  • Type HPE 5120 8G PoE+ (180W) SI Switch
    I/O ports and slots 8 RJ-45 autosensing 10/100/1000 PoE+ ports
    Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
    4 fixed Gigabit Ethernet SFP ports
    Additional ports and slots 1 RJ-45 serial console port
    Memory and processor 128 MB flash
    128 MB SDRAM
    Packet buffer size: 0.5 MB
    Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
    Management IMC - Intelligent Management Center; Command-line interface; Web browser; SNMP manager
    1000 Mb Latency < 3 µs
    Throughput up to 13.4 Mpp/s
    Routing/Switching capacity 18 Gb/s
    Routing table size IPv4 : 32 entries
    MAC address table size 8192 entries
    Dimensions (H x W x D) 4.36 x 30.0 x 26 cm (1.72 x 11.81 x 6.3 ) (1U height)
    Weight 3 kg (6.61 lb)
    Frequency 50 / 60 Hz
    Maximum heat dissipation 163 BTU/hr (171.97 kJ/hr)
    Voltage 100 - 240 V ac, rated (90 - 264 Vac, max)
    -48 to -60 V dc, rated (-36 to -72 V dc, max) (depending on power supply chosen)
    Idle power 19 W
    Maximum power rating 230 W
    PoE power 180 W PoE+
    Operating Temperature 0°C to 55°C (32°F to 131°F); 40°C (32°F to 104°F) when used with any SFP+ 10-GbE
    Operating relative humidity 40°C (15% to 95% @ 104°F) noncondensing
    Nonoperating/Storage temperature -40°C to 70°C (-40°F to 158°F)
    Nonoperating/Storage relative humidity 65°C (15% to 90% @ 149°F) noncondensing
    Acoustic Pressure: 51.8 dB, Low-speed fan: 51.8 dB, High-speed fan: 55.3 dB; ISO 7779
    Safety UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS Compliance
    Emissions FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003; ETSI EN 300 386 V1.3.3; AS/NZS CISPR 22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
  • View full specification...

  • 3 Years Extended Warranty 100% Ready Stock Best Price Match
    100% Genuine Products 24/7 Technical Support
JG309B

HPE 5120 8G PoE+ (180W) SI Switch

Overview Specification Support Warranty

Overview Of JG309B

No Data Found

Specification Of JG309B

JG309B Datasheet

Specification
Type HPE 5120 8G PoE+ (180W) SI Switch
System specifications
I/O ports and slots 8 RJ-45 autosensing 10/100/1000 PoE+ ports
Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
4 fixed Gigabit Ethernet SFP ports
Additional ports and slots 1 RJ-45 serial console port
Performance
Memory and processor 128 MB flash
128 MB SDRAM
Packet buffer size: 0.5 MB
Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
Management IMC - Intelligent Management Center; Command-line interface; Web browser; SNMP manager
1000 Mb Latency < 3 µs
Throughput up to 13.4 Mpp/s
Routing/Switching capacity 18 Gb/s
Routing table size IPv4 : 32 entries
MAC address table size 8192 entries
Physical specifications
Dimensions (H x W x D) 4.36 x 30.0 x 26 cm (1.72 x 11.81 x 6.3 ) (1U height)
Weight 3 kg (6.61 lb)
Electrical specifications
Frequency 50 / 60 Hz
Maximum heat dissipation 163 BTU/hr (171.97 kJ/hr)
Voltage 100 - 240 V ac, rated (90 - 264 Vac, max)
-48 to -60 V dc, rated (-36 to -72 V dc, max) (depending on power supply chosen)
Idle power 19 W
Maximum power rating 230 W
PoE power 180 W PoE+
Environmental specifications
Operating Temperature 0°C to 55°C (32°F to 131°F); 40°C (32°F to 104°F) when used with any SFP+ 10-GbE
Operating relative humidity 40°C (15% to 95% @ 104°F) noncondensing
Nonoperating/Storage temperature -40°C to 70°C (-40°F to 158°F)
Nonoperating/Storage relative humidity 65°C (15% to 90% @ 149°F) noncondensing
Acoustic Pressure: 51.8 dB, Low-speed fan: 51.8 dB, High-speed fan: 55.3 dB; ISO 7779
Safety agency certifications and emissions
Safety UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS Compliance
Emissions FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003; ETSI EN 300 386 V1.3.3; AS/NZS CISPR 22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
Our Trusted Clientele Worldwide
Esr-Connect
Johnson-and-Johnson
Exon
Novartis
Siemens-Healthineers
Sheraton
Sk-Telecom
ASDA
DHL
UPS
Lezzat-ltd
Electrotechnical-certification-scheme
WHY ORM SYSTEMS
why orm system image
why orm system image
Technical Support

ORM Systems offers reliable and scalable renowned products that allow seamless expansion to performance and adaptability to network enterprises. Our professional team of highly skilled engineers provides 360 technical support to help you with presale and after-sales journeys to enable customers with features and capabilities of the products.

We strive to deliver a seamless experience that guarantees complete satisfaction along with guidance and support in service settings to promptly resolve issues.

Standard Services
Standard Services image
Standard Services image
Get Quote
Get a free quote!
× Thank you! your form has been submitted successfully. Our expert will be in touch with you shortly.
×
ORM Registered Companies