Overview
Cisco Switch C9300L-48UXG-2Q-E is the most stackable switch for security, IoT, mobility, and cloud and serves as the building blocks for Cisco's premier corporate architecture, Software-Defined Access. It has an optimized platform with improved architecture and enhanced memory. Cisco Catalyst 9300 Series Switch C9300L-48UXG-2Q-E provides 48 x 10/100/1000 multi-gigabit copper ports with a default 1100W AC power supply, 472 Gbps switching capability and 792 stacking.
Specification
Device Type | Switch - 48 ports - L3 - managed - stackable |
Enclosure Type | Rack-mountable |
Subtype | Gigabit Ethernet |
Ports | 36 x 10/100/1000 (UPOE) + 2 x 40Gb Ethernet + 12 x 1/2.5/5/10GBase-T |
Power Over Ethernet (PoE) | UPOE |
PoE Budget | 675 W |
Performance | Switching capacity: 472 Gbps ¦ Switching capacity with stacking: 792 Gbps ¦ Forwarding rate: 351.19 Mpps ¦ Forwarding rate with stacking: 589.28 Mpps |
Capacity | IPv4 routes: 32000 ¦ IPv6 routes: 16000 ¦ Multicast scale: 8000 ¦ QoS scale entries: 5120 ¦ ACL scale entries: 5120 ¦ VLANs supported: 4094 ¦ Switched virtual interfaces (SVIs): 1000 ¦ Packet buffer size: 16 MB |
MAC Address Table Size | 32000 entries |
Jumbo Frame Support | 9198 bytes |
Routing Protocol | OSPF, RIP-1, RIP-2, EIGRP, VRRP, PIM-SM, EIGRP for IPv6, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng, MSTP |
Encryption Algorithm | 128-bit AES, 256-bit AES |
RAM | 8 GB |
Flash Memory | 16 GB |
Status Indicators | Status |
Interfaces | 36 x 1000Base-T RJ-45 60 W ¦ 2 x 40Gbit LAN uplink ¦ 1 x network stack device ¦ 1 x management (LAN) RJ-45 ¦ 1 x console ¦ 1 x USB 2.0 ¦ 12 x 1/2.5/5/10GBase-T RJ-45 |
Power Device | Internal power supply - hot-plug |
Power Redundancy | Optional |
Power Provided | 1100 Watt |
Voltage Required | AC 120/230 V (50 - 60 Hz) |
MTBF | 275,010 hours |
Width | 17.5 in |
Depth | 1.7 in |
Height | 19.2 in |
Weight | 16.87 lbs |