AT815SN Mainframe(11n,General NPE, Outdoor,2x2 Single Band(5GHz),Internal Antenna,PoE adapter)

AT815SN-POE Specifications

Dimensions (H x W x D)

49 mm x 295 mm x 132 mm

Weight

0.8 kg

System memory

128 MB DDR2

32 MB flash memory

Power input

PoE power supply: in compliance with IEEE 802.3af/at

Maximum power consumption

9.5 W

NOTE:

The actual maximum power consumption depends on local laws and regulations.

Operating temperature and altitude

-60 m to +1800 m: -20°C to +55°C

1800 m to 5000 m: Temperature decreases by 1°C every time the altitude increases 300 m.

Storage temperature

-40°C to +70°C

Operating humidity

5% to 95% (non-condensing)

IP Rating

IP55

Atmospheric pressure

70 kPa to 106 kPa

Antenna type

Built-in antenna

Horizontal beamwidth: 60 degrees

Vertical beamwidth: 15 degrees

Antenna gain

13 dBi

Maximum transmit power

5G: 26 dBm (combined power)

NOTE:

The actual transmit power depends on local laws and regulations.

You can adjust the transmit power from the maximum transmit power to 1 dBm, with a step of 1 dB.

Maximum number of non-overlapping channels

5 GHz

802.11a

20 MHz: 5

802.11n

20 MHz: 5

 

NOTE:

The table uses the number of non-overlapping channels supported by China as an example. The number of non-overlapping channels varies in different countries. For details, see the Country Codes & Channels Compliance.

 

NOTICE:

If the AP is delivered to the USA, pay attention to the following on channel and frequency band usage.

The country code of the AP is fixed.

High power radars working at frequencies in the range of 5.25 GHz to 5.35 GHz, 5.47 GHz to 5.6 GHz, and 5.65 GHz to 5.725 GHz can interfere with or even damage APs working at the same frequency.

Channel rate

802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbit/s

802.11n: 300 Mbit/s