+1 (281)
747-5957
Specification
ITACD-006B Specification
ITACD-006B Specification |
| Parameter/Model | ITACD-006B |
| Main Processor | ATMEL ATMEGA series high performance MCU |
| Coprocessor | ALTERA MAXII series high performance CPLD |
| Vehicle Detection | When a vehicle passes coil detection zone, it detects traveling condition of the vehicle. Support up to 6 coil simultaneous detection. |
| Parameter Setup | May dial-up switch to set parameters of vehicle detector. |
| Status Display | May via indicator, to display status of vehicle detector parameters. |
| Communication Port | One RS485 port |
| Trigger Signal Output | Each coil detects corresponding channel’s signal output. Output signal high/low level (to be customized) and trigger method are optional. User can select to use RS485 COM method to output trigger signal. |
| Fault Signal Output | When coil has fault or circuit is open, device will output fault signal. |
| Coil Input | May simultaneously connect to 6-ch coil inputs. |
| Indicator | Power indicator, each coil corresponds to a detection indicator and a fault indicator. |
| Dial Switch | Three 8-bit dial switches, Three 4-bit dial switches |
| Capture Rate | ≥99.9% |
| Auto Tuning | Vehicle detector supports auto-tuning |
| Base Frequency Auto Refresh | When no vehicle pass coil, vehicle detector can auto refresh base frequency. Automatically compensate for the effects of climate, 40 ℃ maximum per hour. That is not a transient ambient temperature should be within an hour 40 ℃. |
| AB Logic Detection | Product supports AB logic detection function |
| Response Time | Response time<20ms |
| Oscillation Frequency | Oscillation frequency may be adjusted, internal support 16 statuses for selection. |
| Sensitivity Adjustable | Each channel’s sensitivity can be adjusted within 8 levels. |
| Existence Time Adjustable | Each channel’s existence time can be separately adjusted within two levels as 30s and 60s. |
| Button | One reset button. |
| Power Input | DC12V±10% with overvoltage, over current, reverse polarity protection, can safely and stably support power for the device. |
| Port Protection | Corresponding output port all have over current protection |
| Consumption | <2W |
| Working Environment | Working temperature -30℃~+70℃, working humidity 10%~90% |
| Dimension | independent box 191.5mm*148.0mm*38.0mm |
| Unit Weight | <1Kg |
